Updated MIDI Implementation chart from the G2M V3?

The G2M™ Universal Guitar to MIDI Converter.

Moderator: sonuus

Updated MIDI Implementation chart from the G2M V3?

Postby AndyHornBlower » Sat May 13, 2017 5:35 pm

Is there a new MIDI Implementation chart for the V3?

The links on your Docs and Downloads pages are still for the V2. I read that and it showed there were no CCs sent other than all notes off, and no aftertouch, which made me think the G2M wouldn't be all that useful to me. From reading your forum, and a bit of the FAQs, I now see that's not the case.

By still showing the old chart, you may be putting people off buying it.

I realise much of it will be the same, but the differences are important. It doesn't have to be a whole new PDF, if that's hard to organise. A simple text file, even just an addendum to the old chart, would be fine.

Although I'm now satisfied the G2M V3 will do what I want, I'm still wondering if there's more information that I could learn from a proper MIDI spec chart.
AndyHornBlower
 
Posts: 5
Joined: Sat May 13, 2017 5:10 pm

Re: Updated MIDI Implementation chart from the G2M V3?

Postby james » Wed May 17, 2017 9:26 am

Thank you for pointing this out. We forgot to do it!

It has now been updated, and the web site link should now get you the MIDI implementation chart for the V3 G2M.
User avatar
james
Site Admin
 
Posts: 1844
Joined: Fri Jun 06, 2008 8:12 pm

Re: Updated MIDI Implementation chart from the G2M V3?

Postby AndyHornBlower » Wed May 17, 2017 2:35 pm

You're welcome, and thanks :)

Shouldn't there be another CC or two in the Control Change Transmit box though? I was under the impression it sends Breath (CC 2).

I just got one today, and had a brief play with it this morning. It's very entertaining. I'll look at the output with MIDI-OX later.

I tried it with my Roland XV-3080 (and a small guitar), with some patches set up for my wind controllers and a couple of the built in keyboard oriented ones. It would need patches tailoring to it a bit more but it was a good start.
AndyHornBlower
 
Posts: 5
Joined: Sat May 13, 2017 5:10 pm

Re: Updated MIDI Implementation chart from the G2M V3?

Postby james » Wed May 17, 2017 2:38 pm

Shouldn't there be another CC or two in the Control Change Transmit box though? I was under the impression it sends Breath (CC 2).


:oops: yes!

I'll update the chart later today to include breath.
User avatar
james
Site Admin
 
Posts: 1844
Joined: Fri Jun 06, 2008 8:12 pm

Re: Updated MIDI Implementation chart from the G2M V3?

Postby AndyHornBlower » Wed May 17, 2017 2:44 pm

Cool :)

It's always nice when my natural pickiness is of use to someone :mrgreen:
AndyHornBlower
 
Posts: 5
Joined: Sat May 13, 2017 5:10 pm

Re: Updated MIDI Implementation chart from the G2M V3?

Postby james » Wed May 17, 2017 4:23 pm

The chart has now been updated to include the breath controller.
User avatar
james
Site Admin
 
Posts: 1844
Joined: Fri Jun 06, 2008 8:12 pm

Re: Updated MIDI Implementation chart from the G2M V3?

Postby AndyHornBlower » Wed May 17, 2017 9:27 pm

Great. Thanks, James.
AndyHornBlower
 
Posts: 5
Joined: Sat May 13, 2017 5:10 pm


Return to G2M™ Support

Who is online

Users browsing this forum: No registered users and 1 guest

cron